ICarman Haas ine-High Eas End 2D Skena Scanning Galvanometer, 3D Laser Scanning Galvanometer, Beaud Power Laser Welding Galvanometer, Beaud Power Laser Welding galvanometer, I-pulasitiki enjoloba, ezisetshenzisiwe zezimboni, ubumbano nokunye ukubhala. Ukuqina okujulile, ukucubungula okuhle, ukucubungula okukhethekile okubonakalayo.
I-Carman haas 2-axis galvanometer scanner ikhanda kufaka phakathi isivinini esiphakeme (uchungechunge olujwayelekile, lenzelwe ukufakwa kwe-laser, ubuhle be-laser, indawo yokuphrinta, ukuphrinta okusheshayo, ubuhle be-on on.embedded Control System kuqinisekisiwe ukusebenza kwe-servo loop. Ihlangene, lizinzile futhi lisebenze kahle.
1. I-Apperule: 10mm, 12mm;
2. Izinga elifanelekile lokulinganisa, ukulungiswa okuphezulu okukhudlwana okungukukhudlwana, ukuma okuphindaphindwayo;
3. Ijubane eliphakeme kakhulu lokucubungula embonini ukukhulisa ukukhiqizwa kokukhiqizwa;
4. Ukunemba okuphezulu namamodeli aphezulu okuqina atholakalayo kwizicelo zokuthwebula okuqondile;
I-5
6. Kulula ukufaka.
| Isifanekiso | Zb2d-10a | Zb2d-12a | I-ZB2D-10C | I-ZB2D-12C |
| I-Aperture (MM) | 10 | 12 | 10 | 12 |
| I-angle ejwayelekile yokuskena | ± 0.35 Rad | ± 0.35 Rad | ± 0.35 Rad | ± 0.35 Rad |
| Ukungahambi kahle | <0.5 mrad | <0.5 mrad | <0.8 MRAD | <2 mrad |
| Iphutha Lokulandelela | 0.15ms | 0.1MS | 0.2ms | <0.2ms |
| Isikhathi Sokuphendula Isinyathelo | 0.3ms | <0.35ms | 0.4ms | <0.4ms |
| Ukuphindaphinda (i-RMS) | <2 Urad | <2 Urad | <2 Urad | <2 Urad |
| Thola ukudonsa | <50 ppm / k | <50 ppm / k | <80 ppm / k | <80 ppm / k |
| Zero drift | <30 Urad / k | <30 Urad / k | <30 Urad / k | <30 Urad / k |
| I-Drift yesikhathi eside ngaphezulu kwama-8hours (ngemuva kwama-30 min warn-up) | <0.1 MRAD | <0.1 MRAD | <0.2 MRAD | <0.2 MRAD |
| Ijubane lokumaka | <2.5m / s | <2m / s | <2m / s | <2m / s |
| Ukubeka Ijubane | <15m / s | <10m / s | <10m / s | <10m / s |
| Izidingo Zamandla | ± »15v / 3a | ± »15v / 3a | ± »15v / 3a | ± »15v / 3a |
| Isiginali yedijithali | Xy2-100 | Xy2-100 | Xy2-100 | Xy2-100 |
| I-Walection Wavelength | I-1064NM | I-1064NM | I-1064NM | I-1064NM |
| Ukushisa kokushisa | -15 ℃ kuya ku-55 ℃ | -15 ℃ kuya ku-55 ℃ | -15 ℃ kuya ku-55 ℃ | -15 ℃ kuya ku-55 ℃ |
| Ukushisa kwesitoko | -10 ℃ kuya ku-60 ℃ | -10 ℃ kuya ku-60 ℃ | -10 ℃ kuya ku-60 ℃ | -10 ℃ kuya ku-60 ℃ |
| Ubukhulu be-LWH (MM) | I-114X96XX94 | I-116X99XX97 | I-114X96XX94 | I-116X99XX97 |
Izimo:
(1) kubhekiselwa ekujuleni kokushisa kungakapheli amahora angu-8 ngemuva kokuqala isigamu sehora ukufudumala;
. Ngokusho kokuqukethwe okumaka okuhlukile nemiphumela yokumaka, ijubane elikhulu lokumaka lingaba likhulu njengejubane elikhulu lokuma.
(3) Ama-waveleth ajwayelekile ama-waveleth, amanye ama-wavelength adinga ukwenziwa ngokwezifiso.
