I-CO2 laser cutting ingasetshenziswa ukusika cishe zonke izinto zensimbi noma ezingezona ezensimbi.Isistimu yokubona ihlanganisa i-laser resonator cavity optical system (okubandakanya isibuko sangemuva, izibuko eziphumayo, izibuko ezikhombisayo kanye ne-polarization Brewster mirror) kanye nesistimu yokubona yokulethwa kwe-beam ngaphandle (okubandakanya isibuko esikhanyayo sokuphambuka kwendlela ye-optical beam, isibuko esikhombisayo sazo zonke izinhlobo zokucutshungulwa kwe-polarization, ugongolo. isihlanganisi/isihlukanisi se-beam, namalensi agxilile).
Isibuko se-Carmanhaas reflector sinezinto ezimbili: i-Silicon (Si) ne-Molybdenum (Mo).I-Si Mirror iyisibuko esivame ukusetshenziswa kakhulu;inzuzo yawo izindleko eziphansi, ukuqina okuhle, nokuzinza kokushisa.I-Mo mirror (i-Metal Mirror) indawo eqinile iyenza ilungele izindawo ezibonakalayo ezidinga kakhulu.Isibuko se-Mo ngokuvamile sinikezwa singagcotshiwe.
I-Carmanhaas reflector mirror isetshenziswa kabanzi kulezi zinhlobo ezilandelayo ze-CO2 laser engraving & cutting machines.
1. Izinga lokubonisa eliphezulu, umthelela ongcono ekusikeni nasekuqoshweni, okubekezelelekayo ngenxa yokuminyana kwamandla aphezulu, nomzimba omncane oqinile - ukumbozwa kwefilimu ngokumelene nokuxebuka futhi kuhlala isikhathi eside ukuze kwesulwe.
2. Isivinini sokusika nokuqopha kwezinye izinhlelo zokusebenza sithuthukile, nekhono lokukhanya okubonisiwe liyathuthukiswa.
3.Okubekezeleleka kakhudlwana ekusuleni, ubude besikhathi sempilo kanye nenqubo engcono yokumbozwa ngemisebe.
| Imininingwane | Amazinga |
| Ukubekezelela Dimensional | +0.000” / -0.005” |
| Ukujiya Ukubekezelelana | ±0.010” |
| Ukufana : (Plan) | ≤ 3 arc amaminithi |
| Imbobo ecacile (epholishiwe) | 90% ububanzi |
| Umfanekiso ongaphezulu @ 0.63um | Amandla: 2 imiphetho, Irregularity: 1 fringe |
| Scratch-Dig | 10-5 |
| Ububanzi (mm) | ET (mm) | Okubalulekile | Ukugqoka |
| 19/20 | 3 | I-silicon | Gold coating@10.6um |
| 25/25.4 | 3 | ||
| 28 | 8 | ||
| 30 | 3/4 | ||
| 38.1 | 3/4/8 | ||
| 44.45 | 9.525 | ||
| 50.8 | 5/5.1 | ||
| 50.8 | 9.525 | ||
| 76.2 | 6.35 | ||
| 18/19 | 3 | Mo | Kungagqotshiwe |
| 20/25 | 3 | ||
| 28 | 8 | ||
| 30 | 3/6 | ||
| 38.1/40 | 3 | ||
| 50.8 | 5.08 |
Kufanele kuqashelwe kakhulu lapho uphatha i-infrared optics.Sicela uqaphele lezi zinyathelo zokuphepha ezilandelayo:
1. Ngaso sonke isikhathi gqoka ombhede weminwe ongenampushana noma amagilavu erabha/i-latex lapho uphatha izinto zokubona.Ukungcola namafutha esikhumbeni kungangcolisa kakhulu ama-optics, okubangela ukuwohloka okukhulu ekusebenzeni.
2. Ungasebenzisi noma yimaphi amathuluzi ukuze ukhohlise i-optics -- lokhu kufaka phakathi ama-tweezers noma okokukhetha.
3. Ngaso sonke isikhathi beka i-optics kusicubu se-lens esihlinzekiwe ukuze uvikeleke.
4. Ungalokothi ubeke okokusebenza endaweni eqinile noma emahholoholo.I-infrared optics ingaklwejwa kalula.
5. Igolide elingenalutho noma ithusi elingenalutho akufanele nanini lihlanzwe noma lithintwe.
6. Zonke izinto ezisetshenziselwa i-infrared optics zintekenteke, kungakhathaliseki ukuthi i-crystal eyodwa noma i-polycrystalline, inkulu noma i-fine grained.Azinamandla njengengilazi futhi ngeke zimelane nezinqubo ezivame ukusetshenziswa ku-glass optics.
